For sale: Voice Command microphone reroute harness for RNS-510

Description: New RNS-510 navigation units have a full Voice Command enabled. However, it requires that the microphone is connected directly to the RNS and from RNS to the BT module instead of directly to the BT module. This harness allows to reroute the microphone from BT module to RNS and back to BT if the car is already equipped with the factory BT wiring harness.

Connection: according to the picture below:

For sale: Rain Light Sensor + Anti-Dazzle Mirror harness

Description: A harness for rain-light sensor and auto-dimming/anti-dazzle mirror mk5/mk6 Golf/Jetta, Passat B6/CC etc.

Connection: mk5 Golf/Jetta, Passat: ... mk6 Golf/Jetta: ... Passat CC: ...

Required: Rain-Light Sensor, Auto-dimming (anti-dazzle) Mirror, VCDS coding. The wiring for auto-dimming has a provision for exterior auto-dimming mirror up to the door connector for driver side only.

For sale: Fog Light Harness for 9006 bulbs

Description: A harness for fog lights mk5/mk6 Golf/Jetta, Passat B6/CC etc. Connection: mk5 Golf/Jetta, Passat: right A/4, left D/2, mk6 Golf/Jetta: ... Passat CC: ... Required: VCDS recoding and hi-line CECM, Passat CC requires relay: ... . Trigger wire included.

For sale: '10 Jetta Sportwagen / Golf Variant Back-Up Camera / Rear View Camera power harness

Description: A harness for '10+ Jetta Sportwagen / Golf Variant (and most likely '08+ Passat Wagon) to power up the low-line rear view camera located in the trunk opening switch (part number: 5N0 827 566 J, not inside the badge). Connection: Red - Fuse #16 (5 Amps), Yellow - pin C/28 of CECM (new style J519), Brown - ground. Required: VCDS recoding and video signal wire 5M1 970 161 AC.

For sale: US Touareg (T1, T2) rear fog wiring harness

Description: A 3-piece wiring harness for US-spec Touareg (T1, T2) to enable both rear fog lights. Two pieces connects lamp connectors with the hatch connectors under the roof and the third piece connects both hatch connectors under the roof with the Comfort Module connector. OEM color coding (grey with white stripe). Required: VCDS recoding and light switch with rear fog light option.

For sale: Golf 5 10-12 pin adapters for HIDs with pin 11 wired

Description: A set of two 10-12 pin adapters to install OEM bi-xenon HIDs in a car equipped with Halogen headlights. Adapters have pin 11 for hi-beam HID shutter wired. Required: VCDS recoding and hi-line Central Electr. control module (CECM, J519).

For sale: OEM alarm siren wiring harness for mk5 Golf/Jetta

Description: Wiring harness to connect the OEM alarm siren to the Comfort Module. For vehicles equipped with OEM alarm horn (US market). Includes a pin to extract one pin from the plug in the existing wiring harness and reconnect to this harness.